Electrifying your cigar box guitar or other homemade instrument build can be a very rewarding experience. Being able to plug into an amp not only gives you more volume, but it opens the door to a huge range of effects that would not otherwise be available. And it is a proven fact that having a pickup in a guitar makes it easier to sell – being able to plug in and rock out evokes images of Eddie Van Halen and Slash and is sure to get any would-be rocker’s blood pumping.
Glenn walks you through how he installs the mini humbucker pickup in the “Mi Amor” cigar box guitar he designed for C. B. Gitty.
How I Took This Cigar Box Guitar to a Whole New Level
The Mi Amor meets the Snake Oil Humbucker: A Killer Combo
It sounds raw and dirty.
A single coil pickup in a cigar box guitar has grit and a surly swagger. But for this build, the sound of a solitary single coil pickup is missing something.
When designing the Mi Amor – a recent addition to the C.B. Gitty line of guitars – I wanted it to have a big punch. Picture a cinder block-sized fist, wearing brass knuckles, being thrown into your gut. You know, really taking the air out of you.
This illustrated guide written by Glenn Watt walks you through how to install the C. B. Gitty Part number 54-020-01, “Pre-Wired 4-String Single Coil Pickup Harness with Volume and Tone.” Cutout and drill bit sizes are given and the steps clearly shown for mounting one of these handy pre-wired pickup harnesses into cigar box guitars.
The principles in this guide can also be used for most any single-coil or humbucker pickup with a neck-through cigar box guitar, where you often have to notch down into the neck (and brace underneath it) to get the pickup into place.
